How to flash stock ROM via SP Flashtool on Android
In this guide we’ll show you the process to install stock/official ROM on an Android phone via SP flashtool. The Smart Phone Flashtool a.k.a SP Flashtool is a very useful tool that helps you flash stock ROM on your device in just a matter of few clicks. If you are using a custom ROM on your device but want to revert your device firmware back to stock or you accidentally soft bricked your device then installing stock firmware on it can only brings it back to life.
Another good thing about the SP flashtool is that you can also flash the stock firmware even on a switched OFF device. So we recommend you to use SP Flashtool for flashing stock firmware on your Android device. We have posted step by step complete process to install stock ROM via SP flashtool, just go ahead and follow the instruction carefully.
How to flash official/stock ROM on Android via Smart Phone Flashtool
Before you begin:
Download and install latest USB drivers for your device, Click here to download.
Your device must have at least 60% charge.
Back up important data, including messages, images and other.
Download SP Flahstool Zip from here and extract it.
Process to flash stock/official ROM on Android via Smart Phone Flashtool
Step 1: Download the stock firmware for your device regarding it’s model and then extract it in a specific folder.
Step 2: It’s time open the extracted SP_Flash_Tool folder and run the Flash_Tool.exe file from there.
Step 3: In the SP Flashtool interface click on “Download” tab and then click on Scatter-Loading button under it.
Step 4: Now navigate to the folder where you have extracted the stock ROM file, you will see the ROM file will have word ‘scatter’ in it. Then click Download under the Download Tab.
Step 5: Now it’s essential to connect your device to PC, when you connect the data cable with device the SP Flashtool will detect your device, if it doesn’t, press Volume keys a few times.
Step 6: The installation process will begin as soon as PC detects your device, let the process complete.
Step 7: Once the installation process is completed a Green Ring will appear with a tick.
That’s it! Just reboot your device, you will stock firmware booting up on your device.
